Main Features
• Dual input and output capabilities
• Maximum PV input current increased to 27A, supporting up to 10,000W of power
• Wide PV input voltage range from 60VDC to 450VDC
• Integrated communication port for Battery Management System (BMS)
• Built-in Wi-Fi for remote monitoring via app and over-the-air (OTA) firmware updates
• Pre-charge circuit included to minimize inrush current
• True protection against battery reverse polarity
• Low noise operation with minimal no-load power consumption
• Integrated PV DC switch for added safety
• Supports two strings of PV input
• Equipped with a built-in current transformer sensor for self-consumption applications
• Meter calibration function included
• Parallel output functionality available
• Metered secondary output provided
| Model | Axpert VM II Elite 6KP |
|---|---|
| Rated Power | 6000VA / 6000W |
| Input Voltage | 230 VAC |
| Selectable Voltage Range | 170–280 VAC for personal computers / 90–280 VAC for home appliances |
| Frequency Range | 50 Hz / 60 Hz Auto sensing |
| AC Voltage Regulation | 230 VAC ± 5% |
| Surge Power | 12000VA |
| Efficiency Peak | 93% |
| Transfer Time | 10 ms for personal computers / 20 ms for home appliances |
| Waveform | Pure sine wave |
| Battery Voltage | 48 VDC |
| Floating Charge Voltage | 54 VDC |
| Overcharge Protection | 63 VDC |
| Solar Charger Type | MPPT |
| Maximum PV Array Open Circuit Voltage | 500 VDC |
| Maximum PV Array Power | 10000W |
| Maximum PV Input Current | 27A |
| MPP Range @ Operating Voltage | 60–450 VDC |
| Maximum Solar Charge Current | 120A |
| Maximum AC Charge Current | 100A |
| Maximum Charge Current | 120A |
| Dimensions | 144 × 348 × 446 mm |
| Net Weight | 12.5 kg |
| Communication Interface | RS232 / RS485 / CAN / WiFi |
| Humidity | 5% to 95% RH, non-condensing |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
